Aluminum plate refers to the aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m. With the progress of large equipment, there are more aluminum plates that can be as wide as 600mm.

Aluminum plate refers to a rectangular plate processed by rolling aluminum ingots, which is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, and patterned aluminum plate.

Aluminum plates are usually divided into the following two types:

According to the alloy composition, it is divided into:

High-purity aluminum plate (rolled from high-purity aluminum with a content of more than 99.9%)

Pure aluminum plate (the composition is basically rolled from pure aluminum)

Alloy aluminum plate (composed of aluminum and auxiliary alloys, usually aluminum-copper, aluminum-manganese, aluminum-silicon, aluminum-magnesium, etc.)

Composite aluminum plate or welded plate (special-purpose aluminum plate material obtained by compounding multiple materials)

Aluminum-clad aluminum plate (aluminum plate is clad with thin aluminum plate for special purpose)

Divided by thickness: (unit: mm)

Thin plate (aluminum sheet) 0.15-2.0

Regular plate (aluminum sheet) 2.0-6.0

Medium plate (aluminum plate) 6.0-25.0

Aluminum plate with five rib pattern

Aluminum plate with five rib pattern

Thick plate (aluminum plate) 25-200 super thick plate above 200

1. Lighting decorations 2. Solar reflectors 3. Building appearance 4. Interior decoration: ceilings, walls, etc. 5. Furniture, cabinets 6. Elevators 7. Signs, nameplates, bags 8. Car interior and exterior decoration 9. Interior decorations: such as Photo frame 10. Household appliances: refrigerators, microwave ovens, audio equipment, etc. 11. Aerospace and military aspects, such as China’s large aircraft manufacturing, Shenzhou spacecraft series, satellites.

The specific cleaning steps of the aluminum plate are as follows:

Rinse the board surface with plenty of water first;gently wipe the surface of the panel with a soft cloth soaked in water-diluted detergent;rinse the surface of the board with plenty of water to wash away the dirt;check the surface of the board, and use detergent to clean the places that have not been cleaned;rinse the surface of the board with clean water until all the detergent is washed away.

Special attention should be paid to the selection of suitable detergents. A basic principle is: must use neutral detergents! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acidic detergents, abrasive detergents and baking varnish soluble detergents.